ESG Toolkit

 View Only

Cemented Paste Backfill Geomechanics at a Narrow-Vein Underhand Cut-and-Fill Mine

  • 1.  Cemented Paste Backfill Geomechanics at a Narrow-Vein Underhand Cut-and-Fill Mine

    Posted 04-17-2024 05:13 PM
    Author: Seymour, Joseph, Raffaldi, Michael, Richardson, Jerald, Zahl, Eric and Board, Mark
     
    Description: Underhand cut-and-fill mining has allowed for the safe extraction of ore in many mines operating in weak rock or highly stressed, rockburst-prone ground conditions. However, the design of safe backfill undercuts is typically based on historical experience at mine operations and on the strength requirements derived from analytical beam equations. In situ measurements in backfill are not commonplace, largely due to challenges associated with instrumenting harsh mining environments. In deep, narrow-vein mines, large deformations and induced stresses fracture the cemented fill, often damaging the instruments and preventing long-term measurements.
    -Description quoted from link below.
     
    Publisher: Rock Mechanics and Rock Engineering.
    NIOSHTIC2 Number: 20056207
     
    Rock Mech Rock Eng 2019 Dec; 52(12):4925-4940.


    ------------------------------
    esgtoolkit@smenet.org
    ------------------------------